Carol Bell, Owner


AUTHORIZED DEALER

OUR BLOG

1/7/2022
This post by AMSOIL Dealer - Carol Bell in Austin delves into the critical importance of a vehicle's oil levels, which should be inspected once a month as a form of preventive maintenance. Read on to find out more!

Oil changes are necessary to keep your engine in shape. Call AMSOIL Dealer - Carol Bell in Austin at (512) 658-0357 or visit AMSOIL's online store to get your hands on the best oil formulas on the market.

First and foremost, there are plenty of methods available if you want to check the condition and oil levels when it comes to an automatic gearbox. You need to be informed of the customary way to implement those checks if you wish to evade any possible dilemma while measuring and changing oils. Before changing the oil, you must inspect the crankcase to look for any metal particles or small magnets in it. If you happen to find some, take it as a sign of extensive wear or a sign of a possible gearbox problem.

The Importance of ATF

This acronym means automatic transmission fluid, and it's used in vehicles with automatic transmissions. It's usually green or red to set it apart from other fluids and engine oils used in the car. If, after measurement, it turns out that the automatic transmission's oil levels are low, you can refill without exceeding the quantity suggested by the manufacturer.

Observe the Differences Before Taking Action

Since gearboxes don't have a filler cap the way engines do, you must carefully pour the transmission oil through the measuring rod's duct. Next, make proper checks until the level is adequate. If the transmission's liquid level remains low, that's presumably due to a loss of liquid someplace in the box, or it hasn't been replaced appropriately.

If you need help finding the most versatile formulas to maintain your car, call AMSOIL Dealer - Carol Bell in Austin at (512) 658-0357 or visit AMSOIL's online store.

How to Consult the Oil Levels in an Automatic Transmission

It's common in old-school transmission models to find another rod on the engine's second-level compartment. One is used to measure the motor's oil standards, while the other concerns the gearbox. If you need a hint, it usually has a vibrant color. Usually, it will be expected to run from 15 to 18 miles for the gearbox liquid to reach its safest service temperature. You may then stop the car on entirely uniform paving and, without shutting down the engine, move the automatic gear selector within all its potential positions, remaining in each one for about five seconds. It's necessary to apply the parking brake and then brake the car with your foot to avoid any movements while you do this.

Following These Shifts, Rest the Engine for Less than Five Minutes

Later, with the engine working, proceed to check the level. Withdraw the dipstick and have a towel or cloth at hand to clean it up. Then, reintroduce the measuring rod and remove it to recheck the level.

Change the Transmission Oil

Replacing transmission oil now and then is key to ensuring the automatic gearbox's dependability and execution. Each manufacturer will determine the miles needed to restore the gearbox filter and the automatic transmission fluid. They tend to take long interludes, although they can be reduced if used for demanding tasks or for driving on uneven roads.

The Transmission Oil Must Be Hot with the Engine Turned off at the Time of Replacement

Carefully remove the crankcase from the gearbox or use the drain plug if you need to. This process is messy, mainly because the oil is hot, can get smeared, and probably spill out. After letting the gearbox drain adequately on a holder or container, the next step is to withdraw the old filter and put in the new one. In some designs, you must remove the crankcase to exchange the filter. Lastly, before piecing everything together, replace the crankcase, and avoid any transmission oil leaks. It has to be tightened to the proper torque. Then, you have to pour enough ATF right through the dipstick line and, once again, make the appropriate level checks.

AMSOIL's Signature Series 5W-30 Synthetic Motor Oil gives superior resistance in extreme heat conditions and maximizes fuel economy.

Reach out to the experts at AMSOIL Dealer - Carol Bell in Austin and get familiar with AMSOIL's wide range of engine oils and automatic transmission fluids. You can also give them a call at (512) 658-0357 to place an order for the most effective oil and keep your engine in mint condition for longer with their additives and oil formulas.